cherry vocoder

[basa333]

hi,

I have make a patch as folowing, everything seems OK, it works, but the carrier knob doesn't show any reaction, even if I turn it as much as I want, the level is high without reaction after turning the knob. What's wrong? the result is not as I wish, the words spoken are almost unintelligible

thanks tom

[huggermugger]

You have no audio feeding the Carrier input on the Vocoder. Patch the output of your mixer, or your oscillator, into the Carrier input.

[huggermugger]

Like this...

[huggermugger]

By the way, you can click this button to change the Browser to show a list instead of icons. Maybe helpful?

[basa333]

You have no audio feeding the Carrier input on the Vocoder. Patch the output of your mixer, or your oscillator, into the Carrier input.

hi, thanks, I showed this just to show that even without the oscillator connected the carrier shows a high level - why? after connect oscillator carrier indicates the same

[huggermugger]

You have no audio feeding the Carrier input on the Vocoder. Patch the output of your mixer, or your oscillator, into the Carrier input.

hi, thanks, I showed this just to show that even without the oscillator connected the carrier shows a high level - why? after connect oscillator carrier indicates the same

Mine does that too, not sure why. A bug? It happens after I've connected an oscillator to it and then remove the connection.

[basa333]

exactly, it mus be a bug. which waveform of oscilator is the best for vocoder? square, triangle, sawtooth? I'v got the feeling, that a ratio between sufficiently strong microphone signal/oscillator signal is most important. if mic is too weak, the result is weak too

[huggermugger]

exactly, it mus be a bug. which waveform of oscilator is the best for vocoder? square, triangle, sawtooth? I'v got the feeling, that a ratio between sufficiently strong microphone signal/oscillator signal is most important. if mic is too weak, the result is weak too

A bright waveform with lots of harmonics is best. You're using a square, which is good. A sawtooth might be better. And I see you have a curve in your Vocoder, maybe flatten that to start.

The level of your Modulator looks low.

[basa333]

ok, thanks for your advices, I will try this, maybe with an other oscillator

greets tom

[Steve W]

Thanks for this Vocoder Discussion. I haven't played with the Vocoder, but I am interested in following your progress in case I want to try.

Talking about the Library, I wonder why people use it on the left side. @huggermugger Thanks for the tip about the Library's list option.